2008 Outbound 46 | 46ft

Hull

• 100% hand-laid solid fiberglass single piece hull/keel lamination
• Two outer layers of vinylester resin for blister resistance
• Forward watertight bulkhead
• Oversized integral longitudinal/ floor/mast step/ engine bed grid for maximum hull stiffness
• Bulkheads laminated 360 degrees to hull and deck laminate
• Interlux Interprotect 2000 epoxy barrier coats below waterline

Deck

• Baltek cored deck
• Hulland deck bolted on 4” centers and sealed with 3M 5200 adhesive/sealant
• Aluminum toe rail.
• Six polished 316 SS 8” mooring cleats
• 30” x 1.25” 316 SS pulpit, pushpit, and stanchions with 1×19 uncoated lifelines
• 316 SS custom double anchor roller
• Lewmar V4 windlass with wired handheld remote control-new motor gearbox, seals, and bearings (2024)
• 77# Spade anchor w/ 325’ 5/16 G4 chain
• Fortress FX-37 with 200’ rode and chain
• Large bow storage locker forward of watertight bulkhead
• Nine Lewmar Ocean series opening hatches – new seals and gaskets (2019)
• 8 Stainless steel opening ports – all re-bedded 2019
• Four dorade vents with 1” 316 SS guards
  
• Two Lewmar 68 two-speed STC primary winches mounted on coaming
• One electric powered Lewmar 46 two-speed STC winch mounted on starboard cabin top next to companionway for main halyard and main sheet
• One Lewmar46 two-speed STC winch mounted on port cabin top next to companionway
• Spinlock rope clutches
• Lewmar mainsheet traveler mounted forward of companionway – new double upright traveler car (2021)
• Lewmar genoa cars
• T shaped cockpit with 6’ seats
• Walk-through transom for direct access to swim platform with concealed folding ladder
• 316 SS radar pole with detachable hoist for outboard motor
• Edson outboard motor mount
• Scheaffer snubber for Leisurefurl Boom