
G. Winter's Sailing Center




















2025 Beneteau Oceanis 37.1 | 39ft
Broker Info
Boat Highlights:
Year of Vessel
2025
Fuel Type
DIESEL
Length
39 ft
Manufacturer
Beneteau
Condition
New
Boat Type
Sail
2025 Beneteau Oceanis 37.1 - Brand new model! On-site now!
Exterior Design:
The deck is open and easily maneuverable, without back stays – a layout used successfully on the Oceanis 30.1 and Oceanis 34.1. The generous double spreaders on the Oceanis 37.1 promise excellent performance.
For short-handing, all the rigging is led back to the two aft winches. Only the halyards remain grouped around the coachroof. All the instruments, including a 7-inch plotter, can be found on the starboard helm console.
The hull is flared with a rib giving it fluid lines below water and allowing it to achieve greater power and stability. It also improves the hull rigidity, controls the weight well, and provides greater volume inside the bow.
Interior Design:
The Oceanis 37.1 cruiser’s interior volume is remarkable. The generous space in the salon is nearly as large as a 40-footer.
The salon is offset to port with a sofa for relaxing and a comfortable table for six, facing the lengthwise galley.
The fore cabin has a breathtaking view of the horizon through two large portholes integrated into the hull side. In the two-bathroom version, a spacious double bed is positioned against the starboard hull.
Features include:
- 2 Cabin + Workshop/1 Head Layout
- Separate Shower
- In mast furling
- Shallow Draft Iron Keel
- Comfort Trim Level
- Beige padding upholstery, in cabins
- Iro-Deck slatted aft platform
- Iro-Deck slatted helm seats
- Iro-deck Cockpit Floor
- Hot/cold water cockpit shower
- Galley: Compact sink cover with cutting board
- Hifi Fusion RA210 + Interior loudspeakers & Waterproof exterior speakers
- Dual USB socket: in the saloon (x 1), in the forward cabin (x 1), in the aft cabins (x 1), Starboard helm station (x 1)
- Full 230 V system (5 Inside sockets, 1 Shore power socket)
- 40 Amperes battery charger, IBS sensor, Navicolor 3’’5 screen
- 1 AGM amperes additional service battery (95Ah)
- Mosquito nets for opening portholes
- Salon: LED indirect lighting
- Galley: Stainless steel 2 burner oven/grill cooker on a gimbal (instead of standard)
- Bottle storage under the floor
- 1 Starboard manual (H35.2 STA) rigging winch to replace the winch feeder + 1 Cadet Grey halyard bag
- Polyester bowsprit with integrated anchoring gear and bobstay (for Code 0 and asymmetric spinnaker)
- Asymmetrical spinnaker rigging / Code 0 (sheets, Blocks, Halyards)
- Additional jammers (on the roof for the halyard or on the coaming for the Genoa sheet, depending on the pack)
- Rigging run back to the cockpit (except boom topping lift)
- 2 Manual (H40.2 STA) genoa sheet winches + Aluminum "Speed Grip" winch handle + Winch handle box
- Genoa sheet tracks on the roof with the traveler (pulls back the traveler on the self-trimming jib rail)
- Genoa sheet on furler, high-strength Dacron C-breeze (to replace the standard self-tacking jib)
- Offshore Pack - Raymarine
- 1 i70s display, at port side helm station
- DST810 Sensor (Log, Speedometer, Temperature)
- Wind Sensor (Windvane, Anemometer)
- Windex Windvane • Starboard helm station: - 1 Steering console - 1 7’’ Axiom + multi-function touchscreen (GPS, Chart plotter, Card reader - Navionics®+ Blank cartography included) - 1 Console cover, Cadet Grey
- P70s autopilot + control (to port)
- Chart table: RAY73 VHF, AIS receiver function
- Electric Windlass 1000W + Remote Control
- Electric Port Coachroof Winch
- Mooring - Anchoring Kit
- Luxe Polyester-Wood Cockpit Table - Without Cover
- Dolce 51 Cockpit Cushions
- Tunnel Bow Thruster
- Front Opening Door For Icebox
- Extra Bench For Salon
- PVC Marlin Weiss Upholstery
- Brown Oak Laminated Floors
- Pre-Wiring For 115V 60HZ Microwave Oven
- Double Berth In Salon
- Electric Toilet Quiet Flush - Starboard Aft - Sea Water
- 3 Blade Folding Propeller
- White Hull
- AIS 700 - Raymarine
- Opening Porthole in the Cockpit for Aft Cabins
- Pleated Blinds - Salon Hull Portholes
- Air Conditioning/Reverse Cycle Heat
- Outboard Engine Bracket
Construction:
• Design in accordance with European Directive requirements and according to CE certification
• Monolithic hull design in polyester
• Monolithic structural inner molding bonded to the hull
• Injected deck construction in glass fiber and Saerform foam sandwich, covered with non-slip diamond pattern
• Hull-deck join screwed, bonded, and trimmed with 1 bulwark
• Cast iron keel fixed with bolts and stainless steel backing plates
• 2 Underhung rudders with stainless steel stock
• White colored hull - Grey metal hull graphics • 4 Hull portholes
SAIL BOAT SPECIFICATION
















































