Pair Boats are built using a grid system for the stringers made of solid 2” core material and transoms made of 2” reinforced core sandwiched between a beefy lamination schedule to hold the transom brackets securely. In the hull, a combination of bi axial heavy 24 oz. cloths are used to create a structure that will not shake, shutter, or toss you around and with the weight underneath you.
Interior liner with non-skid
- Deck cap with 27 gallon livewell
- Full Composite 3 Piece construction
- Standard Console with insert, footrest, and glove box
- Full transom bracket for 25" motor
- 106 gallon fuel tank/epoxy coal tar epoxy
- White rub rail with stainless insert
- Polished aluminum SO50 leaning post with flip up bolster and
backrest
- Full Power Steering
- 12x12 Electropolish Lenco trim tabs with LED indicator switch
- 4 Gemlux SS Screwless rod holders
- 6 Gemlux SS pull up cleats
- Battery Switch- on/off/both
- Custom Contura 5 dash panel with breakers,12V plug, and dual
USB plug
- 1500gph Bilge pump
- 800gph Livewell pump
- Bronze seacock with strainer
- Water/Fuel Separator
- Aft in floor fish boxes-drain to stern
- Forward Fish box
- Anchor locker with anchor mount
- Under gunwale rod storage racks
- raw Water washdown
- 3/8" Acrylic window
- Accon SS Pop up bowlight
- Anchor/All Around light
- 4 LED under gunwale lights
- SS Swim ladder with grab rail
- 1/2" SS Bow and Stern eyes
- Hull Color- Ice Blue
- Yamaha 300 White
- Bob's Machine jack plate
- Cup Holder od Holder 15 degree (4)
- Gemlux rod Holder/Screwless (2)
- Forward seating with cushions and 2 removable backrests
- New Lounge console with fwd seating for 2 and insulated storage underneath
- Large Fiberglass T Top 6 x 9 with 5 rod holders, outrigger prep, 2 kingfish rod holders, 2 speaker pods, 2 LED down lights, spreader lights, and an electronics box
- Macerator Front Fish Box
