Berthon International

2009 Oyster 82 | 82ft

BILL AND ME

Sant Adrià de Besòs, B, Spain
$1,763,092USD

Broker Info
Berthon International
+44 (0)1590 679222

Boat Highlights:

Year of Vessel

2009

Fuel Type

DIESEL

Length

82 ft

Manufacturer

Oyster

Condition

Pre-owned

Boat Type

Sail

Loan Calculator

2009 build, Oyster 82 BILL AND ME (ex. RIVENDELL) is #12 of this extraordinary series, which are perfect for crossing oceans and also great for more local cruising with a practical layout and spacious accommodation for six guests and ample crew quarters forward. She had a substantial refit in the winter of 2022, which was completed in 2023. Work included a full review of her rig including new standing rigging and paint, review of her entertainment systems, communications and a refresh of her interior. All systems were reviewed and serviced or updated. She has new front sails.

Built to MCA Category 2 requirements.

 

RCD Status: The yacht conforms with the essential safety requirements of Directive 94/25EC or RCDII (2013/53/EU as appropriate (Recreational Craft Directive) and is categorised A – “Ocean”

 

Hull, Deck & Superstructure Construction:

  • Hull moulded by Bridgeland Moulders Ltd and fitted out by SYS to the order of Oyster Marine Ltd.
  • Hull and deck structures moulded under controlled conditions and all laminating carried out by hand, to high standard. GRP lay-up specification calculated to meet and exceed Lloyd’s Register of Shipping Rules for Yacht and Small Craft with bulkheads made of marine Ply.
  • Hull uses a high-performance gelcoat laminated using vinylester resin for all outer skins. The hull is of single skin construction, reinforced with a matrix of stringers and floors, above and below the waterline. Stringers, bulkhead landings and floors incorporate non-structural, inert, polyurethane foam.
  • Hull Finish - Awlgrip ‘Stark White’ hull with cove line and double boot top lines in Awlgrip ‘Medium Grey.’
  • Deck moulded in GRP with a balsa core for strength and insulation. In load-bearing areas the core is replaced with plywood for additional strength, and all load-bearing fittings have aluminium backing plates.
  • Teak laid decks, with additional thin teak deck on coach roof forward of sprayhood.
  • Deck saloon styling incorporates an eyebrow effect and modern angular windows. Louvre inlets at end of eyebrow and window mullions in ‘white.’

 

Keel & Rudder:

  • High performance bulb (HPB) external lead keel.
  • Fully protected skeg-hung rudder.

 

Stern Design:

  • ‘Sugar scoop’ stern design incorporating a platform instep, which is especially useful for bathing and boarding, and trimmed with laid teak. 
  • This area includes a fold-down stainless-steel bathing/boarding ladder with oval treads, fitted with a positive retaining pin for stowage. 
  • A gateway through the pushpit gives access to a built-in stairway with three teak covered steps leading down to the bathing platform.

SAIL BOAT SPECIFICATION

Vessel Name
BILL AND ME
Length Overall
82 ft
Beam
20.75 ft
Manufacturer
Oyster
Boat Type
sail-cruiser
Fresh Water Tank
581.18 gal
Boat Model
82
Year Of Vessel
2009
Fuel Type
Diesel
No. of Fuel Tanks
1
Fuel Capacity
845.35 gal
Main Engine Hours
7788
Main Engine Model
Turbo-charged QSB5.9-305 MCD
Main Engine Make
Cummins
Main Engine Horsepower
1 X 305

Other Listings From Berthon International

Loan Calculator

$
Min: $25,000 | Max: $10,000,000
%
years
$